The project connects fundamental materials physics with industrial challenges in sustainable aluminium production. Moreover, the successful candidate will collaborate with researchers at NTNU, SINTEF and industrial partners. The position is particularly relevant to graduates in materials science, physics and nanotechnology who want to pursue research with practical applications.
The doctoral fellowship is scheduled to begin in August or September 2027. NTNU lists a normal gross annual salary of NOK 580,000, subject to a statutory pension contribution. Applications must reach the university by 1 December 2026.
Overview of the PhD Position at NTNU
The position is based at NTNU’s Department of Physics in Trondheim. It is a full-time, fixed-term doctoral research appointment lasting three years.
The candidate will join two important research environments:
-
-
TEM Gemini Centre: A specialist research centre focused on transmission electron microscopy and materials physics.
-
SFI FAST (Future Aluminium Structures): A research initiative connecting NTNU, SINTEF and industrial partners to improve the performance and sustainability of recycled aluminium.
-
Furthermore, the project involves international researchers and industrial organisations. This collaboration offers valuable exposure to academic research and real manufacturing challenges.
Research Focus: Microstructural Origin of Ductility in Recycled Aluminium Alloys
The central research question concerns how the internal structure of recycled aluminium influences its mechanical performance.
Aluminium is widely used in transportation, construction, energy and engineering. However, recycling post-consumer aluminium introduces challenges. Different alloy compositions and impurities can affect the material’s strength, deformation and fracture behaviour.
Therefore, understanding these effects is essential for developing reliable recycled alloys.
Key research activities
The selected candidate will investigate several microstructural features, including:
-
-
Precipitates and precipitate-free zones.
-
Grain boundaries and constituent particles.
-
Deformation-induced defects.
-
Strain localisation and damage development.
-
Relationships between microstructure and mechanical properties.
-
In addition, the candidate will use advanced experimental methods, such as:
-
-
Transmission Electron Microscopy (TEM).
-
Scanning Transmission Electron Microscopy (STEM).
-
Scanning Electron Microscopy (SEM).
-
Electron Backscatter Diffraction (EBSD).
-
Mechanical testing and diffraction-based methods.
-
The researcher will also analyse experimental results and collaborate with specialists in solid mechanics and fracture modelling.
Expert insight: Applicants should understand that this project requires more than routine microscopy. Its central objective is to connect observations at the microscopic level with measurable mechanical behaviour. Experience in quantitative characterisation and microstructure-property relationships can therefore strengthen an application.
The university seeks candidates with a relevant academic background and practical research experience.
Educational qualifications
Applicants must hold a relevant Master’s degree in one of these disciplines:
-
-
Physics.
-
Nanotechnology.
-
Materials Science.
-
An equivalent relevant discipline.
-
The Master’s degree must include an independent research project of at least 30 ECTS, comparable to a Master’s thesis.
Moreover, candidates should normally have a Master’s grade average equivalent to B or better on NTNU’s grading scale. Applicants with weaker grades may receive consideration if they demonstrate exceptional research potential through relevant employment or peer-reviewed publications.
Students completing their Master’s degree can also apply. However, they must provide evidence of the completed qualification before joining, no later than September 2027.
Technical and research skills
Candidates must demonstrate:
-
-
Practical experimental experience in physics, nanotechnology or materials science.
-
Good written and spoken English.
-
Basic programming knowledge.
-
The ability to conduct independent research.
-
Previous experience with electron microscopy, particularly TEM, STEM, SEM and EBSD, is advantageous.
Additionally, knowledge of Python, image analysis and quantitative data processing can strengthen an application. Interest in metallic materials, deformation mechanisms and industrial research is also desirable.
Norwegian language skills are preferred but are not listed as a mandatory qualification.
Salary, Funding and Benefits
This position offers a salaried doctoral employment opportunity rather than an unpaid research placement.
The advertised employment conditions include:
|
Feature |
Details |
|---|---|
|
Annual gross salary |
NOK 580,000 |
|
Position code |
1017 |
|
Pension contribution |
2% statutory deduction |
|
Employment |
Full-time, fixed-term |
|
Duration |
Three years |
|
Starting period |
August or September 2027 |
In addition, NTNU offers several professional and employment benefits:
-
-
Access to advanced microscopy facilities at the TEM Gemini Centre.
-
Career guidance throughout the doctoral programme.
-
An employee mentoring programme.
-
Funding resources to support research activities.
-
Membership benefits through the Norwegian Public Service Pension Fund.
-
Free basic Norwegian language training at A2 level.
-
It is important to distinguish salary from additional funding. The advertisement does not specify a separate tuition waiver or guaranteed travel allowance. Therefore, applicants should consult NTNU for any individual financial questions.
The linked SFI FAST research centre receives support from the Research Council of Norway and the aluminium industry. It also connects academic research with industrial innovation.
How to Apply for the NTNU PhD Position in Norway
Interested candidates must submit their applications electronically through the Jobbnorge recruitment portal.
Application deadline: 1 December 2026.
The application should contain the following documents:
-
-
Updated academic CV.
-
Bachelor’s and Master’s degree certificates.
-
Academic transcripts for both qualifications.
-
A copy of the Master’s thesis, or a draft if the thesis is still in progress.
-
A motivation letter of approximately 400 words or one page.
-
Relevant publications and research work, where available.
-
Relevant additional certificates, where applicable.
-
Names and contact details of two academic or professional referees.
-
Applicants educated outside Norway should also provide documentation explaining the scope and quality of their complete higher education. Include a diploma supplement where available. An existing assessment from Norway’s Directorate for Higher Education and Skills (HK-dir) can also be attached.
All application documents must be in English or a Scandinavian language.
Expert Application Tips for International Candidates
Competition for doctoral research positions can be strong. Therefore, applicants should present a clear connection between their academic experience and the advertised research objectives.
Consider these practical recommendations before submitting your application.
1. Highlight relevant experimental experience
Do not simply list instruments in your CV. Explain what you investigated using them.
For example, describe your experience with SEM, TEM, EBSD, XRD or mechanical testing. Explain how these techniques helped you understand material properties.
2. Connect your Master’s research with the project
Your motivation letter should explain why your previous research prepares you for this doctoral project.
For example, an applicant with experience in ceramic coatings could highlight microscopy, phase analysis and materials characterisation skills. However, they should also explain how they intend to develop expertise in aluminium alloys and deformation behaviour.
3. Demonstrate programming and analytical abilities
Basic programming is a required qualification. Consequently, mention relevant experience with Python, numerical analysis, image processing or experimental data interpretation.
Where possible, provide a practical example of how you used these skills.
4. Prepare a focused motivation letter
A one-page letter offers limited space. Therefore, prioritise three points:
-
-
Your academic preparation and research experience.
-
Your understanding of recycled aluminium and microstructural behaviour.
-
Your motivation to work with NTNU and its research partners.
-
Avoid generic statements about wanting an international research career.
5. Contact referees in advance
Choose referees who understand your research capabilities. Ideally, they should be able to discuss your experimental skills, independence and ability to complete demanding research projects.
Finally, check every document before submission. NTNU states that the selection committee will assess the information received by the application deadline.
Conclusion
The PhD Candidate in Materials Physics at NTNU offers an excellent research opportunity for graduates interested in materials science, physics and advanced characterisation. The project combines electron microscopy, mechanical testing and fundamental research into recycled aluminium alloys. Moreover, collaboration with NTNU, SINTEF and industrial partners provides valuable exposure to applied materials research. Eligible candidates should prepare their academic documents, highlight relevant experimental experience and submit a focused motivation letter. Visit the official recruitment portal and apply before 1 December 2026.
Position Summary
|
Feature |
Details |
|---|---|
|
Program Name |
PhD Candidate in Materials Physics |
|
Host Country |
|
|
University |
Norwegian University of Science and Technology (NTNU) |
|
Funded By |
NTNU employment; linked SFI FAST centre supported by the Research Council of Norway and the aluminium industry |
|
Duration |
3 years |
|
Study Mode |
Full-time, fixed-term doctoral employment |
|
Eligibility |
Relevant Master’s degree in Physics, Nanotechnology, Materials Science or equivalent; minimum 30 ECTS independent research project |
|
Financial Support |
NOK 580,000 gross annual salary; 2% statutory pension contribution |
|
Fields of Study |
Materials Physics, Materials Science, Recycled Aluminium Alloys, Electron Microscopy and Mechanical Behaviour |
|
Deadline |
01/12/2026 |
|
Starting Date |
August or September 2027 |
|
Official Website |
Frequently Asked Questions (FAQs)
Applicants need a Master’s degree in Physics, Nanotechnology, Materials Science or an equivalent discipline, including an independent research project worth at least 30 ECTS.
Yes. International applicants can apply, provided they meet the academic, research and employment requirements.
The advertised gross annual salary is NOK 580,000. However, a statutory pension contribution
The doctoral research position lasts three years. Moreover, the university expects the selected candidate to start in August or September 2027.
The project investigates how microstructural features influence ductility and deformation in recycled aluminium alloys, using advanced microscopy and mechanical testing.
Previous experimental research experience is required. However, experience with TEM, STEM, SEM and EBSD provides an additional advantage.
Applicants should submit an academic CV, degree certificates, transcripts, Master’s thesis or draft, a motivation letter and two referees’ contact details.
The vacancy requires good written and spoken English but does not specify a mandatory IELTS or TOEFL score. Therefore, check the university’s admission requirements.
Yes. NTNU offers employee benefits, pension scheme membership, mentoring opportunities, career guidance and free basic Norwegian language training at A2 level.
